STUCCOFAST® SYSTEM MODEL 500MA
Product only available in: United States
The system includes the Model 500MA Tool with magnetic washer holder, ET&F® coiled pins and steel or plastic washers which capture and contain the wire lath. The sequential fire operation and adjustable overdrive control enable a perfect fastening with each pull of the trigger. Like all ET&F® cold formed steel framing tools, the Model 500MA pneumatic tool is powered by a standard air compressor operating at a maximum 120 psi air pressure. The fastest, safest, lowest cost and easiest way to attach stucco lath and insulation to cold formed steel framing.
Item number
ETF500MA
Nail length
38 - 65 mm | 1 1/2 - 2 9/16"
Weight
2.7 kg | 5.952 lbs
Actuation system
Single Sequential Actuation
Technical data
Item number
ETF500MA
Magazine capacity
300
Nail length
38 - 65 mm | 1 1/2 - 2 9/16"
Height
297 mm | 11.693"
Width
134 mm | 5.276"
Length
264 mm | 10.394"
Weight
2.7 kg | 5.952 lbs
Pressure
5 - 8 bar | 75 - 115 psi
Actuation system
Single Sequential Actuation
Loading
coil
Applications
Siding
